Products

Powder cores
Metal powder
Support

Platinum Division to provide you with the best after sales service, have any questions and suggestions you can contact us.

Contact Phone
    • Tel:

      (86)0755-26654881

    • Fax:

      (86)0755-29574277

NPI Series

NPI Series Characteristic
  • 6.5% silicon iron distributed gapped powder core
  • Good temperature stability
  • Lower losses than powder iron magnetic cores
  • Excellent DC Bias performance
  • High saturation flux density
  • Applications
  • Core Loss Curves
  • Temp.Curves
  • Frequency Curves
  • DC Bias
  • Specification

功率因数校正 (PFC)

EMI 滤波器

开关稳压电感器

在线路噪音滤波器

升压电感器

 

1.  产品性能比较  Comparison of Characteristics


2.  案例  Case



3.  基本信息  Basic information

***备注：所有性能参数均由铂科测试平台提供。Notes:All data are provided by POCO testing platforms


PHD 40μ磁损曲线
PHD 40μ磁损曲线



PHD 40μ磁损曲线

The notation of magnetic core
The size from 0.14 inch to 3.063 inch
The permeability range: 26μ,60μ,75μ,90μ,125μ
  
磁芯料号 磁芯尺寸(mm) 截面积 磁路长度 窗口面积 重量 体积 AL值
A B C D E F cm2 cm cm2 g cm3 nH/N2 ±12%
PHD722-4-40 20 30 70 20 70 110 4 26.26 31 700 112 70
PHD722-4-60 20 30 70 20 70 110 4 26.26 31 700 112 105
PHD722-8-40 20 30 70 40 70 110 8 26.26 31 1400 224 105
PHD722-8-60 20 30 70 40 70 110 8 26.26 31 1400 224 210
PHD722-12-40 20 30 70 60 70 110 12 26.26 31 2100 336 210
PHD722-12-60 20 30 70 60 70 110 12 26.26 31 2100 336 315
PHD722-24-40 40 60 70 40 140 150 16 40.26 42 4200 672 210
PHD722-24-60 40 60 70 40 140 150 16 40.26 42 4200 672 315
PHD722-36-40 40 60 70 60 140 150 24 40.26 42 6300 1008 315
PHD722-36-60 40 60 70 60 140 150 24 40.26 42 6300 1008 432
PHD722-48-40 40 60 70 80 140 150 32 40.26 42 8400 1344 420
PHD722-48-40 40 60 70 80 140 150 32 40.26 42 8400 1344 630
 
6
PHD722-4-40
PHD722-4-60
8
PHD722-8-40
PHD722-8-60
3
PHD722-12-40
PHD722-12-60
4
PHD722-24-40
PHD722-24-60
5
PHD722-36-40
PHD722-36-60
7
PHD722-48-40
PHD722-48-60
Part Number AL ±8% Permeability Before coating                After coating Sample request PDF
Outer dimension Inner dimension Height Outer dimension Inner dimension Height
(mm/inch) (mm/inch) (mm/inch) (mm/inch) (mm/inch) (mm/inch)
max min max max min max
NPF306060C 85 60 77.8/3.063 49.23/1.938 16.88/0.665 78.94/3.108 47.96/1.888 18.15/0.715 Apply now
NPF300060C 68 60 77.8/3.063 47.96/1.888 13.7/0.539 78.94/3.108 49.23/1.938 14.97/0.589 Apply now
NPF226060C 138 60 57.15/2.25 26.39/1.039 16.24/0.639 58.04/2.285 25.58/1.007 17.13/0.674 Apply now
NPF225060C 75 60 57.15/2.25 35.56/1.4 14.97/0.589 58.04/2.285 34.75/1.368 15.86/0.624 Apply now
NPF200060C 73 60 50.8/2 31.75/1.25 14.46/0.569 51.69/2.035 30.94/1.218 15.35/0.604 Apply now
NPF185060C 86 60 46.74/1.84 28.7/1.13 16.24/0.639 47.63/1.875 27.89/1.098 17.13/0.674 Apply now
NPF184060C 135 60 46.74/1.84 24.13/0.95 19.4/0.764 47.63/1.875 23.32/0.918 20/0.787 Apply now
NPF157060C 81 60 39.88/1.57 24.13/0.95 15.48/0.609 40.69/1.602 23.32/0.918 16.37/0.644 Apply now
NPF141060C 56 60 35.81/1.41 22.35/0.88 11.46/0.451 36.7/1.445 21.54/0.848 12.28/0.483 Apply now
NPF135060C 38 60 34.29/1.35 23.37/0.92 9.89/0.389 35.1/1.382 22.56/0.888 10.83/0.426 Apply now
NPF130060C 61 60 33.02/1.3 19.94/0.785 11.67/0.459 33.83/1.332 19.3/0.76 12.61/0.496 Apply now
NPF106060C 75 60 26.92/1.06 14.73/0.58 12.18/0.48 27.69/1.09 14.1/0.555 12.99/0.511 Apply now
NPF092060C 51 60 23.57/0.928 14.4/0.567 9.89/0.389 24.28/0.956 13.77/0.542 10.7/0.421 Apply now
NPF090060C 43 60 22.86/0.9 13.97/0.55 8.62/0.339 23.62/0.93 13.39/0.527 9.38/0.369 Apply now
NPF080060C 32 60 20.32/0.8 12.7/0.5 7.35/0.289 21.08/0.83 12.07/0.475 8.11/0.319 Apply now
NPF068060C 43 60 17.27/0.68 9.65/0.38 7.35/0.289 18.03/0.71 9.02/0.355 8.11/0.319 Apply now
NPF065060C 36 60 16.51/0.65 10.16/0.4 7.35/0.289 17.4/0.685 9.53/0.375 8.11/0.319 Apply now
NPF050060C 27 60 12.7/0.5 7.62/0.3 5.75/0.226 13.46/0.53 6.99/0.275 6.51/0.256 Apply now